Special vehicles for waste management
In vehicle construction, we offer modern special bodies for waste collection as well as for street and sewer cleaning.
M-U-T has a tradition of more than 90 years in Austria in the development and production of superstructures for special vehicles.
Through individual production, adapted to the wishes and requirements of our customers, we offer individual solutions down to the smallest detail. The ergonomic and at the same time robust design in perfect combination with a wide range of equipment variants make M-U-T special vehicles the best, most durable and most economical on the world market.
Waste collection
Due to its rotary drum principle, the ROTO-M-U-T proves itself especially in the collection of moist rubbish as well as commercial and industrial waste.
Advantages of ROTO-M-U-T (rotary drum system):
- Less weight – therefore maximum payload
- Less overhang – thus very agile and optimal axle load distribution
- Self-cleaning effect – therefore hygienic
- Closed sealed drum – therefore well-suited for organic waste disposal
- Low maintenance and operating cost
The design is available in 3 variants: “Classic”, “Styling” or “Naked Design”
The ROTO-M-U-T is available in sizes from 12 – 22m³, customized to the respective chassis.
The ROTO-M-U-T-naked, the design variant of the ROTO-M-U-T, proves its worth particularly in the collection of moist household waste as well as commercial and industrial waste thanks to its rotating drum principle.
The PRESS-M-U-T proves itself through its high reliability and at the same time maximum variability for the collection of all waste fractions: from household waste and bulky waste to cardboard and plastics.
Its greatest advantage is the universal use under the most difficult conditions. From smallest containers to the largest ones and manual loading – everything can be put into it.
It’s main characteristics:
- Reliable and economical
- Maximum content with smallest exterior dimensions
- Low overhang
- High compaction
- Stable and robust
- Lowest wear
The PRESS-M-U-T is available in loading capacities from16-24m³
The ROTO-M-U-T-MINI convinces by its compact design in combination with the rotary drum principle – especially suitable for the collection of waste and moist rubbish in narrow alleys, small driveways, city centers and in parks – everywhere where “normal” vehicle sizes cannot drive to.
The ROTO-M-U-T MINI is the specialist for tight inner city areas and a real “city-streaker”. It has all typical advantages of a RotoMUT mini and maximum compaction with smallest dimensions.
The ROTO-M-U-T MINI is available in 3 widths, in sizes from 4 – 16m³ and as “styling”, “classic” and “naked” design.
Each ROTO-M-U-T MINI is tailor-made to its chassis and is optimally adapted to the customer’s wishes and its area of application.
The M-U-T waste glass collection vehicle impresses with its well thought-out design: one vehicle for the collection of two glass fractions at the same time (white and colored glass) and can be operated by only one person.
Street cleaning
The M-U-T-AUSTROCLEANER road sweeper proves itself on its high reliability and accuracy in cleaning of cities, areas, kerbs or construction sites, at the same time.
The M-U-T street sweeper is one of the most modern machines worldwide and is successfully used for fine dust control.
Optionally available as UM – Recirculation System or RS – Pure Suction System
Applications: Street, area and construction site cleaning both in cities, municipalities, on highways, in road construction for milled material and construction site areas in general.
Advantages: Strongest suction power for coarse soiling, dust and fine dust free sweeping, especially due to recirculating air system, low-noise design, compact and maneuverable with maximum capacity for dirt and water.
Many options, such as: High pressure system, rear suction, fine dust nozzles, front broom, hand suction system, etc. numerous certificates from independent authorized bodies are a guarantee of quality.
The M-U-T-AUSTROCLEANER construction site sweeper proves itself through its high reliability and at the same time highest precision in construction site cleaning, area cleaning, milled material sweeping or city cleaning.
Keyword: fine dust reduction
A water tank, matched to the size and load capacity of the chassis, with a high-pressure pump, designed precisely for the application with one or more high-pressure hose reels for cleaning the channels with high pressure.
A popular accessory: the road washing device, for example as a front washing bar, frog mouth nozzles, rear washing nozzles or “shower”.
Also available as a removable interchangeable unit (summer – winter operation).
Sewer Flushing
The wide range of variants of the M-U-T sewer flushing truck has proven itself through its high reliability with maximum suction and pressure force at the same time when it really has to be clean.
The combination between the suction and the high pressure jetting truck. A combined machine with a water and a sludge tank.
The M-U-T tank in tank system is the preferred solution when using a single tank as a water and sludge tank.
It’s main characteristics and advantages:
- Optimum weight distribution
- Ideal axial loading distribution
- Every unit is equipped with a high performance and high pressure water and vacuum pump.
- P-piston or also called pneumatic ejector piston:
Divides the tank in a front chamber = water tank and a rear chamber = sludge container. The P-piston is adjustable, so the tank can be easily provided as needed. Special but standardized equipment in common with the p-piston is the combination boom which is hydraulically move- and telescopic adjustable to guide a suction or high pressure hose to the sewer.
Combination sewer trucks can also be equipped with a water recycling system. Through a 3-step water recycling system the dirt water can be treated and cleaned this way, to afterwards use it via a high pressure pump for cleaning the sewers. Apart from that, that this method is environmentally very friendly, because no precious drinking water is used up, also refueling water is not necessary any more. Equipped with a load-sensing hydraulic pump these vehicles are a guarantor for optimal effort and lowest noise-level during operation. The water recycling system moreover also possesses an automatic cleaning system and therefore doesn’t need an additional maintenance.
Keyword: fine dust reduction
A water tank, matched to the size and load capacity of the chassis, with a high-pressure pump, designed precisely for the application with one or more high-pressure hose reels for cleaning the channels with high pressure.
A popular accessory: the road washing device, for example as a front washing bar, frog mouth nozzles, rear washing nozzles or “shower”.
Also available as a removable interchangeable unit (summer – winter operation).
e-M-U-T Innovation
Sustainable. Powerful. Electric.
In addition to their high reliability, M-U-T-eTrucks impress with their maximum variability and maximum effectiveness in municipal use: quiet, fast, powerful and sustainable.
The ergonomic, robust and forward-looking design in perfect combination with a wide range of equipment options make the M-U-T-eTrucks the best and most revolutionary solutions in the municipal sector.
Variable.
A perfect combination: 90 years of M-U-T design know-how paired with state-of-the-art e-power make M-U-T-eTrucks highly flexible work tools. At M-U-T, the future has already begun:
- ROTO-M-U-T-e rotary drum waste collection vehicle.
- ROTO-M-U-T-e-MINI rotary drum waste collector in extremely compact design
- PRESS-M-U-T-e waste collection vehicle – the “omnivore
- M-U-T-e-Austrocleaner street sweeper vehicle
- KOMBI-M-U-T-e sewer cleaning vehicle
M-U-T special vehicles Promotional Video
Contact
For inquiries, please contact:
MUT-Inbox Steyr Automotive: mut-inbox@steyr-automotive.com
Andreas Rogl, Business Unit Manager
Mail: andreas.rogl@steyr-automotive.com
Telefon: +43 664 88531725
Günther Heiden, Managing Director
Mail: guenther.heiden@steyr-automotive.com
Phone: +43 664 2500962
Markus Gritsch, Sales – Key Account Manager M-U-T
Mail: markus.gritsch@steyr-automotive.com
Phone: +43 664 88 96 2854
Michael Pölzgutter, Head of Customer Service M-U-T
Mail: michael.poelzgutter@steyr-automotive.com
Phone: +43 664 88 34 6203
For spare parts orders please contact:
Hr. Andreas Ronalter
Mail: andreas.ronalter@steyr-automotive.com
Phone: +43 664 88 96 2855
For customer service issues please contact:
Hr. Thomas Führer
Mail: thomas.fuehrer@steyr-automotive.com
Phone: +43 664 88 96 2871